Head shape Orthodox soft ball feeling. plus more 'fly' design the LEGACY BLACK iron gained popularity in the 'control of forged iron'.
Roger Cleveland designed to detail, with this iron is ハイストレングス steel interface, and then improve the coefficient of restitution of the interface in the sole to hollow structural.
While maintaining high trajectory necessary to dead aim at pins, in addition, that one strong loft design than traditional LEGACY BLACK iron, realizing on the top hand.
Also, to reach the Green, high trajectory in long irons by incorporating the tungsten weights in the sole of the iron # 3, # 4, # 5, and low center of gravity, ball hard to rise became possible. |
|
| 1. ハイストレングス-steel interface with hollow structural coefficient of restitution of the interface evolution
Resilience of high ハイストレングス steel adopts in the face, designed sole internal hollow structures.
Thin-walled area of the interface to maximize the evolution coefficient of restitution raises the ball velocity.
More traditional LEGACY BLACK iron 1 degree strong loft design. Dead aim at pins for realizing on the top hand while maintaining the necessary high ballistic. |
|
|
| 2. Seeking a higher control performance and ease of use
Maintaining while increasing sense of security when you address, and somewhat higher than traditional LEGACY BLACK iron heel toe heel of the head length, higher control performance.
Saul of the # 3 and # 4 and # 5 are fitted with tungsten weights, low center of gravity design enable high trajectory.
Also by latest V. A. R. Medallion absorbs excess vibration by variation of the RBI. |
|
|
| 3. Another place for optimal spin design new scoreline
Long iron-Middle iron's angle of the ditch to somewhat loosely and maximize distance by ideal spin rate of the suppressed the Treme takes too much spin.
Short irons at the Groove angle to slightly sharp and spin performance. |
| P6 | I # 3 | I # 4 | I # 5 | I # 6 | I # 7 | I # 8 | I # 9 | PW |
|---|
| Interface material and structure | ハイストレングス-steel interface, hollow structures (sole Division) |
|---|
| Body material | S25C (soft iron) + V. A. R. Medallion
Only #3-#5 タングステンソールウェイト. |
|---|
| Standard Club lengths (inches) | 39.0 | 38.5 | 38.0 | 37.5 | 37.0 | 36.5 | 36.0 | 35.5 |
|---|
| Loft angle (°) | 20.0 | 22.5 | 25.0 | 29.0 | 33.0 | 37.0 | 41.0 | 45.0 |
|---|
| Lie angle (°) | 59.5 | 60.0 | 60.5 | 61.0 | 61.5 | 62.0 | 62.5 | 63.0
|
|---|
|
